Issues Resolved in DataCore SANsymphony 10.0 PSP20 - Preview 1
Crash During Mirror Recoveries
The DataCore server crashes during recovery with the error: "PNP_DETECTED_FATAL_ERROR - Duplicate PDO".
DataCore Management Console
The Passthrough virtual disks could not be deleted when using the DataCore Management Console.
DataCore Management Console UI Issues on Low Resolution Screens
The DataCore Management Console does not display all UI elements when using the 'Purge Physical Disk' wizard on low resolutions or small window sizes.
Disk Devices Becoming Locked After Restart or Loopback Creation Due to Race Condition
Disk devices that were previously released or used for loopback virtual disks become locked in the DataCore Management Console after a system restart or during the creation of loopback virtual disks. This prevents third-party access to the devices.
DataCore Driver Issue with QLogic QLE26xx/QLE27xx HBAs
Fibre Channel ports report as "Not Started" in the DataCore Management Console immediately after installing the DataCore QLogic Driver.
Delayed ACK Inconsistency in the DataCore Management Console
For ESX hosts not managed by DataCore's vCenter integration, the 'Delayed ACK' column may display incorrect information.
Excessive Memory Allocation in NONPAGED_AREA Causing System Instability
A race condition during target port discovery can lead to excessive memory allocation, potentially causing a system crash.
Manual Reclamation Issue
Manual Reclamation may appear to never complete or take longer than expected while Automatic Reclamation is also being detected on the same virtual disk.
Missing Commands in DataCore Server Panel for Virtual Disk Group
Certain commands were missing from the right-click context menu for virtual disk groups in the DataCore Server Panel.
Support Bundle Collection Termination
The support bundle collection could terminate unexpectedly.
Unnecessary Log Message for Disk Replacement
An unexpected alert appeared in the DataCore Console stating, "A physical disk has been replaced, which may cause problems with the configuration," even when no change had occurred.
Unnecessary Logstore Disk Failure Alerts
The DataCore Management Console triggers unnecessary alerts stating, "The Logstore disk is currently failed," when the logstore logical disk loses access due to normal reasons.
Unclosed DataCore Cmdlets Sessions Cause DCSX Service Unresponsiveness
When an active DataCore cmdlets session is closed (either by script exit or module unload), the active connections are not properly closed. Over time, this leads to the accumulation of unused sessions, potentially causing the DCSX service to become unresponsive.
Virtual Disk Templates
Dual virtual disk templates previously allowed CDP or sequential storage, which is not supported.
Virtual Disks Unserved During Host Conversion
While moving existing ESX host mappings to a vCenter-managed host, virtual disks may become unserved.
Windows Device Manager Issue
Windows Device Manager misidentified the 'DataCore Emulex LPe32000-X' as 'DataCore Emulex LPe32200-X' due to a typo in the configuration file used for device identification.