FCoE and ISCSI HBAs

DataCore do not provide initiator or target drivers for either Fibre Channel over Ethernet (FCoE) or iSCSI 'HBAs'. Therefore, this type of hardware cannot be configured for use with any SANsymphony port roles. They can however still be used as connections to storage using the storage vendor’s own preferred HBA and MPIO drivers.

In this case the FCoE or iSCSI HBA will not be available in the SANsymphony console, and the storage will appear to the DataCore Server as if it were ‘directly attached’.

Also see:

Storage Hardware Guideline for use with DataCore Servers